AQUA-STOP® MODEL CP-224 (Multi Zone Control Panel)
 
Motherboard / Expansion Cards
Motherboard / 1 expansion card.
Primary circuit: 12 Volts DC ( Supplies the valves circuitry)
Secondary circuit: 5 Volts DC ( Supplies the micro processor circuitry)
8 slots allowing 8 pcboards extension cards
Minimum installation: 1 extension card = 6 zones.
       
Inputs:
6 / 48 inputs for water detection terminals.
6 / 48 inputs for wires fault terminals.
6 / 48 inputs for valves status ( closed or opened)
       
   
Full motherboard / 8 expansion cards
     
Expansion card
  

Outputs:
6 to 48 outputs 12 volts DC, for supplying AQUA-STOP valves.
3 relays : SPDT Form C, N.O. , 0.6A @125 VAC, 2A. @30 VDC

1st. relay is used for the telephone dialer (included): AUTOMATIC DIAL-OUT.
Dials up to 4 different remote telephones/ dial a pager.
2nd relay (auxiliary) may be used to connect the panel to another security system installation.
3rd relay ( auxiliary) may be used to activate an external horn. 		 
                       
VISUAL REPORT/ ALARM INDICATORS:
LED status indicators:
Green: Micro processor alimentation
Red:    Water Detection event
Red:    Wirefault event
Red:    Valve status closed / non closing

ALARM button / to mute the internal buzzer
RESET button / to reset the system after curing the detection/wirefault event.

LCD Display- Alphanumeric:

Alarm and fault location
Wiring Valves Status
Valves Opened / Closed
Number of Zones
Number of Valves

Audible alarm:
Internal buzzer (Silenced by the alarm button)

 
Alarm events displayed on the front panel  
       
             

Home  R&D   Literature   Contact us 

Last updated: February 20, 2005

© 2005 GIVE Systems Inc. All rights reserved.   AQUA-STOP ® is a registered trademark owned by GIVE Systems Inc.